產品名稱：筋銹蝕檢測儀 型號：C-CM-4000 廠家：美國NDT James 產品描述: 簡單而經濟的測定鋼筋潛在腐蝕位置的方法。高阻抗電壓表連接鋼筋及參考電極, 可量度半電池電勢。 A simple economical method for identifying areas of probable rebar corrosion. Applications - Locate corroding steel reinforcement
Features & Benefits · Easy to use. · Detachable electrode extension pieces facilitate measurements in hard to reach locations. · High impedance digital meter is designed for tough field conditions. · Electrode is designed for use on horizontal, vertical and inverted positions. · Economical. · Conforms to ASTM C-876. An economical method for identifying areas of corrosion ASTM C-876. A high impedance voltmeter is connected between the reinforcing steel and a Cu-CuSO4 reference electrode on the concrete surface where a measurement can be made for the half-cell potential. This measurement of the probability of corrosion activity. By testing at a fixed distance apart, a grid of half-cell potentials can be developed and areas delineated. Technical Corrosion, which is an electrochemical process, occurs in concrete when oxygen and moisture are present. The actual corrosion is an exchange of energy within different sections of the uncoated reinforcing steel. The relative energy levels can be determined in relation to a reference electrode with a stable electrochemical potential. By connecting a high impedance voltmeter between the reinforcing steel and a reference electrode placed on the concrete surface, a measurement can be made for the half cell potential at the location of the reference cell. This then is a measurement of the probability of corrosion activity in the steel in the vicinity of the reference cell. The reference cell is copper in a copper sulphate solution. By taking half cell potential measurements a fixed distance apart a grid of half cell potentials can be quickly made and thus areas delineated with a high probability of corrosion of the reinforcing steel. To analyze the results, the measurements made with Cor Map™ can be plotted on a grid and lines of equipotential contours drawn, highlighting areas of possible corrosion activity. For example the following guide is listed in ASTM C-876 using a copper/copper sulphate half cell: · For readings of 350mV and greater there is a 95% chance of active steel corrosion · For readings 200 to 350mV there is a 50% chance of active steel corrosion · For readings less than 200mV there is only 5% chance of active steel corrosion The method is particularly useful for: · Bridge Decks · Parking Garages · Concrete Piers & Docks · Substructure · Tunnel Lining · Foundations Specifications C-CM-4500 | High impedance voltmeter | C-CM-4410 | Electrode extension pieces each 18 inches (41 cm) long | C-CM-4400 | Reference electrode including copper sulphate reservoir | C-CM-4210 | Container of copper sulphate (capacity 250 ml) | C-CM-4220 | Wetting agent reservoir (capacity 125 ml) | C-CM-4420 | Dispensing sponge | C-CM-4300 | Cable reel with 250 ft. (80 meters) cable | C-CM-4000 | Complete system |
以上是美國NDT James C-CM-4000 Cor-Map鋼筋銹蝕檢測儀的詳細信息，如果您對美國NDT James C-CM-4000 Cor-Map鋼筋銹蝕檢測儀的價格、廠家、品牌、型號、圖片、規范、規格、原理有疑問，或需要詳細報價單、宣傳冊、中英文產品說明書，請點擊我公司 美國NDT James相關產品介紹： 美國NDT James T-HT-1000 Humiditest混凝土鉆孔濕度測試儀 美國NDT James T-C-10 T-C-20 Cementometer微波水泥含水率測試儀 美國NDT James T-S-30 Aquaprobe微波土壤含水率測試儀 美國NDT James T-M-170 Aquameter混凝土含水率測試儀 美國NDT James T-T-90 Trident插針式微波骨料含水率測試儀 美國NDT James I-CB-6000 Carbo Detect混凝土碳化深度酸堿指示劑 美國NDT James I-AS-3000 ASR-Detect混凝土堿骨料反應測試儀 美國NDT James A-AB-1200 A-AV-1300 A-AA-1100 Air Meters混凝土含氣量測試儀 美國NDT JAMES Z-WP-1000 Windsor Probe混凝土強度槍擊檢測儀 美國NDT JAMES W-P-2000 Windsor Pin混凝土強度檢測儀 美國NDT JAMES R-HR-8000 Mini R-Meter鋼筋定位儀 美國NDT JAMES P-C-7300 Bond Test MK III粘結強度測試儀 美國NDT JAMES P-C-728 P-C-729 Anchor錨栓測試儀 美國NDT JAMES M-M-3056 Maturity Meter混凝土成熟度測試儀 美國NDT JAMES Datascan MK II鋼筋混凝****達 美國NDT James C-P-6000 C-P-6050 Porosiscope混凝土滲氣滲水性測試儀 美國NDT James C-CM-4000 Cor-Map鋼筋銹蝕檢測儀 美國NDT James C-CL-3000 Chlorimeter混凝土氯離子含量測定儀 美國NDT James W-M-350 W-M-250 Rebound Hamme機械回彈儀 美國NDT James W-D-2000 Rebound Hamme數字回彈儀 美國NDT James V-E-1000 E-Meter MK II動態彈性模量測試儀 美國NDT James V-V-100 Vu-Con沖擊回波測試儀 美國NDT JAMES V-C-400 V-Meter MK IV混凝土超聲波測試儀 美國NDT James C-CS-8000 C-CS-8300 Gecor 8鋼筋銹蝕程度測定儀 美國NDT James C-RM-8000 Ohmcorr混凝土電阻率測定儀 美國NDT James C-CM-5000 Cor-Map II大屏幕半電池電壓鋼筋銹蝕檢測儀 美國NDT JAMES R-C-400/450/475/410 Rebarscope鋼筋掃描儀 | 
